How to start
Get set up in a few minutes.
Pick your path, tick the steps as you go, and let the app show you around. Ahead itself guides most of it.
Inside the app
Ahead teaches you as you go.
You don’t have to remember any of this. Ahead walks you through setup, highlights each part of your own screen, and gives every major view a short hands-on walkthrough.
Setup, step by step
Ahead asks where your readings come from, helps you allow the few permissions it needs, and waits for your first reading so you can see it works. If you use an Omnipod 5 there’s an optional step for it.
Spotlight tour with your real numbers
Tap Next (or tap anywhere) and Ahead highlights each part of the screen — your glucose, live status dot, active insulin, rate of change, 15/30m outlook, wake alarm and graph — quoting what your screen shows right now.
Hands-on screen walkthroughs
The first time you open the big graph, your notes, the report and other screens, Ahead spotlights the controls right on screen. On the graph you actually pinch to zoom and press and hold a dot to log.
This is your glucose: 142
142 mg/dL, from your sensor a moment ago. It refreshes about every 5 minutes, and the colour matches your range so you can read it at a glance.
Find every lesson, with ticks for the ones you’ve done, under Menu → Training, and replay any of them. Four are marked essential (your main screen, the graph, your notes and the alert practice), and Ahead reminds you until they’re done. The lessons never switch anything off: Ahead keeps watching and alerting while you learn.
Setup guide
Install it in a few minutes.
Tick steps off as you go — your progress is remembered on this device.
Before you start: Ahead is a second buddy, not your main CGM. Keep your official Dexcom app or receiver (and its alarms) as your primary the whole time. After setup, check it’s still receiving readings and still alarms on its own — if setting up these apps interrupted it, stop and undo that.
Download AheadBLE and allow the install
On the phone that will wear the sensor. When Android asks, allow your browser to install apps (Settings → Install unknown apps). You can switch that back off afterwards. See exactly what the screens look like →
Play Protect may say the app is unrecognized. That’s normal for a beta shared outside the store. Only continue if you got it from this page and the fingerprint matches.
Already use the official Dexcom app or Juggluco? You can skip AheadBLE: turn on Health Connect sharing there (Dexcom app: Settings → Connections → Health Connect; Juggluco: menu → Settings → Health Connect), then jump to step 5.
Pair your G7 in AheadBLE
Open AheadBLE (it appears as Ahead Connect) and allow the Bluetooth (“Nearby devices”), notification and Health Connect permissions. Enter the 4-digit pairing code from your G7 applicator — or scan its barcode — and start monitoring. Keep the phone close to the sensor.
Wait for “Sensor connected :)”
AheadBLE’s notification tells you the truth. Don’t move on until you see it.
Brand-new sensor? The G7’s own warm-up means no readings yet. That’s normal — the notification flips once they start.
Keep AheadBLE alive
Set its battery to Unrestricted (Settings → Apps → Ahead Connect → Battery) so Android doesn’t put it to sleep overnight.
On Samsung (and some other phones) also lock the app in Recents.
Install Ahead
Create your account (or sign in) and follow the setup wizard. This is the main account — sign up as the person living with Type 1. Let Health Connect share blood glucose with it, and allow notifications, exact alarms and Do Not Disturb access so urgent alerts can break through. Set battery to Unrestricted and lock it in Recents too.
Check the loop is closed
Within a few minutes Ahead should show your current number, arrow and 15 & 30 minute outlook. If it says there’s no data, go back to step 3 — AheadBLE has to show connected first.
Now test your safety net: confirm your official Dexcom app or receiver is still showing readings and its alarms still sound on their own. Never rely on Ahead alone.
Share with family Optional
In Ahead open Menu → Account → Manage Sharing, type their email and tap Grant access. They need an Ahead Lite account with a verified email first.
Turn on Omnipod 5 insulin on board Optional · experimental
Only if you use an Omnipod 5. In Ahead open the menu, choose Omnipod IOB and allow notification access. Ahead then reads the insulin-on-board line the Omnipod app already shows — and nothing else from it. Other pumps aren’t read.
Ahead only observes: it logs detected boluses (you can edit them), shows IOB, and gives heads-ups. It never doses and never suggests a dose. Insulin amounts stay on your phone.
Add your Pixel Watch Optional
The watch app only mirrors Ahead, so finish steps 1–6 first. Pixel Watches don’t install apps from the web, so this one goes on from a computer over Wi-Fi: on the watch turn on Developer options → ADB debugging and Wireless debugging, pair it to your computer with Android’s adb tool, then run:
adb connect <watch-address>:<port> adb install ahead-wear-latest.apkThe phone and watch apps are signed with the same key and recognise each other only because of that, so take both from this page — a mix of builds from different places won’t pair. Open Ahead on the watch once; readings from your phone should appear within a minute.
You’re all set. You don’t need to keep opening the apps. Next new sensor? See how to switch sensors.
Download Ahead Lite and allow the install
On your own phone. When Android asks, allow your browser to install apps (Settings → Install unknown apps). You can turn that back off afterwards.
Play Protect may say the app is unrecognized — normal for a beta shared outside the store. Only continue if it came from this page and the fingerprint matches.
Create your account and verify your email
This is your own companion account — one per person, per phone. Sign up with the email address the person will share with, then tap the link in the verification email — sharing won’t work until your email is verified. Check spam if it doesn’t arrive.
Ask them to share with you
This part is theirs to do. In Ahead they open Menu → Account → Manage Sharing, type your email and tap Grant access. You can’t do it for them — that’s deliberate, so nobody can look at someone’s glucose without being invited.
Pick who you’re following
Ahead Lite lists whoever has shared with you (if there’s only one, it opens automatically). Not there yet? Open Account in the menu — the list refreshes live — or sign out and back in.
Let it reach you
Allow notifications and set the app’s battery to Unrestricted (Settings → Apps → Ahead Lite → Battery) so alerts arrive while your phone sleeps. You can also have alerts spoken under Alerts & Voice Settings.
On Samsung (and some other phones) also lock the app in Recents so Android doesn’t close it.
Know what you’re looking at
You’ll see their current number, trend, a 15-minute projection and a 3-hour chart. These are estimates from glucose alone — they don’t know about insulin, food or activity. If you’re worried, call them. Ahead Lite is a second pair of eyes — it doesn’t replace their own CGM alarms or an emergency service.
Your sign-in lasts about 30 days, so open the app about once a month. If it ever says it can’t reach data, open it and sign in again.
You’re all set. You’ll get a calm heads-up if they’re dropping or low, or if their data goes quiet.
First time installing outside the Play Store?
What you’ll see, and what to tap.
These screens look scary, but they’re Android being careful with any app that isn’t from the store. Wording varies a little by phone. The green outline is what to tap.
Keep the download
Your browser warns about every .apk. Only continue if you got it from aheadt1d.com.
Allow your browser, once
Tap Settings when asked, flip this on, then go back. You can turn it off again afterwards.
Install
If you already have Ahead, it says “update” instead. Your settings and history stay.
Play Protect: install anyway
It hasn’t seen this beta before, so it asks. Check the fingerprint if you want to be sure it’s the real file.
How it fits together
Each app does one job.
A reading travels from your sensor to your alerts — and, if you choose, to your wrist and to the people who care about you.
Ahead doesn’t read your sensor itself — it reads Android’s Health Connect. So your source goes first: AheadBLE, or the official Dexcom app or Juggluco with Health Connect sharing turned on. The alerts are worked out on your phone, so they keep working with no internet and don’t depend on our server.
Ahead — the person with Type 1
Signs up in Ahead with their own email. It holds their readings and decides who can follow. Always sign Ahead in as the person living with Type 1, never as a follower.
Ahead Lite — one per follower
Each family member or caregiver signs up in Ahead Lite on their own phone with their own email. One Lite account can follow several people, like a parent with two kids.
AheadBLE and the watch app
AheadBLE only connects your sensor to your phone. The watch app uses the account you already signed in with on your phone.