How to start

Get set up in a few minutes.

Pick your path, tick the steps as you go, and let the app show you around. Ahead itself guides most of it.

Inside the app

Ahead teaches you as you go.

You don’t have to remember any of this. Ahead walks you through setup, highlights each part of your own screen, and gives every major view a short hands-on walkthrough.

1

Setup, step by step

Ahead asks where your readings come from, helps you allow the few permissions it needs, and waits for your first reading so you can see it works. If you use an Omnipod 5 there’s an optional step for it.

2

Spotlight tour with your real numbers

Tap Next (or tap anywhere) and Ahead highlights each part of the screen — your glucose, live status dot, active insulin, rate of change, 15/30m outlook, wake alarm and graph — quoting what your screen shows right now.

3

Hands-on screen walkthroughs

The first time you open the big graph, your notes, the report and other screens, Ahead spotlights the controls right on screen. On the graph you actually pinch to zoom and press and hold a dot to log.

☰ Menu Ahead ⏰ Alarm
CURRENT GLUCOSE (SAMPLE) 142 ↗
IOB 1.40 U Omnipod · Automated
+0.6 mg/dL/min
151 in 15m · 160 in 30m
💡 Why This Matters: Post-Meal Curve›
LAST HOUR · TAP FOR FULL GRAPH
STEP 1 OF 9 · IN-APP TOUR PREVIEW

This is your glucose: 142

142 mg/dL, from your sensor a moment ago. It refreshes about every 5 minutes, and the colour matches your range so you can read it at a glance.

Try it: tap any part of the phone screen or click Next

Find every lesson, with ticks for the ones you’ve done, under Menu → Training, and replay any of them. Four are marked essential (your main screen, the graph, your notes and the alert practice), and Ahead reminds you until they’re done. The lessons never switch anything off: Ahead keeps watching and alerting while you learn.

Setup guide

Install it in a few minutes.

Tick steps off as you go — your progress is remembered on this device.

Before you start: Ahead is a second buddy, not your main CGM. Keep your official Dexcom app or receiver (and its alarms) as your primary the whole time. After setup, check it’s still receiving readings and still alarms on its own — if setting up these apps interrupted it, stop and undo that.

0 of 9 done
  1. Download AheadBLE and allow the install

    On the phone that will wear the sensor. When Android asks, allow your browser to install apps (Settings → Install unknown apps). You can switch that back off afterwards. See exactly what the screens look like →

    Play Protect may say the app is unrecognized. That’s normal for a beta shared outside the store. Only continue if you got it from this page and the fingerprint matches.

    Already use the official Dexcom app or Juggluco? You can skip AheadBLE: turn on Health Connect sharing there (Dexcom app: Settings → Connections → Health Connect; Juggluco: menu → Settings → Health Connect), then jump to step 5.

  2. Pair your G7 in AheadBLE

    Open AheadBLE (it appears as Ahead Connect) and allow the Bluetooth (“Nearby devices”), notification and Health Connect permissions. Enter the 4-digit pairing code from your G7 applicator — or scan its barcode — and start monitoring. Keep the phone close to the sensor.

  3. Wait for “Sensor connected :)”

    AheadBLE’s notification tells you the truth. Don’t move on until you see it.

    Brand-new sensor? The G7’s own warm-up means no readings yet. That’s normal — the notification flips once they start.

  4. Keep AheadBLE alive

    Set its battery to Unrestricted (Settings → Apps → Ahead Connect → Battery) so Android doesn’t put it to sleep overnight.

    On Samsung (and some other phones) also lock the app in Recents.

  5. Install Ahead

    Create your account (or sign in) and follow the setup wizard. This is the main account — sign up as the person living with Type 1. Let Health Connect share blood glucose with it, and allow notifications, exact alarms and Do Not Disturb access so urgent alerts can break through. Set battery to Unrestricted and lock it in Recents too.

  6. Check the loop is closed

    Within a few minutes Ahead should show your current number, arrow and 15 & 30 minute outlook. If it says there’s no data, go back to step 3 — AheadBLE has to show connected first.

    Now test your safety net: confirm your official Dexcom app or receiver is still showing readings and its alarms still sound on their own. Never rely on Ahead alone.

  7. Share with family Optional

    In Ahead open Menu → Account → Manage Sharing, type their email and tap Grant access. They need an Ahead Lite account with a verified email first.

  8. Turn on Omnipod 5 insulin on board Optional · experimental

    Only if you use an Omnipod 5. In Ahead open the menu, choose Omnipod IOB and allow notification access. Ahead then reads the insulin-on-board line the Omnipod app already shows — and nothing else from it. Other pumps aren’t read.

    Ahead only observes: it logs detected boluses (you can edit them), shows IOB, and gives heads-ups. It never doses and never suggests a dose. Insulin amounts stay on your phone.

  9. Add your Pixel Watch Optional

    The watch app only mirrors Ahead, so finish steps 1–6 first. Pixel Watches don’t install apps from the web, so this one goes on from a computer over Wi-Fi: on the watch turn on Developer options → ADB debugging and Wireless debugging, pair it to your computer with Android’s adb tool, then run:

    adb connect <watch-address>:<port> adb install ahead-wear-latest.apk

    The phone and watch apps are signed with the same key and recognise each other only because of that, so take both from this page — a mix of builds from different places won’t pair. Open Ahead on the watch once; readings from your phone should appear within a minute.

First time installing outside the Play Store?

What you’ll see, and what to tap.

These screens look scary, but they’re Android being careful with any app that isn’t from the store. Wording varies a little by phone. The green outline is what to tap.

Keep the download

Your browser warns about every .apk. Only continue if you got it from aheadt1d.com.

Allow your browser, once

Tap Settings when asked, flip this on, then go back. You can turn it off again afterwards.

Install

If you already have Ahead, it says “update” instead. Your settings and history stay.

Play Protect: install anyway

It hasn’t seen this beta before, so it asks. Check the fingerprint if you want to be sure it’s the real file.

How it fits together

Each app does one job.

A reading travels from your sensor to your alerts — and, if you choose, to your wrist and to the people who care about you.

Dexcom G7Sends a reading about every 5 minutes
AheadBLETalks to the sensor and writes each reading to Health Connect
AheadAnalyses on your phone, projects ahead, raises the alerts
Watch & familyAhead for Pixel Watch · Ahead Lite on the phones of people you share with

Ahead doesn’t read your sensor itself — it reads Android’s Health Connect. So your source goes first: AheadBLE, or the official Dexcom app or Juggluco with Health Connect sharing turned on. The alerts are worked out on your phone, so they keep working with no internet and don’t depend on our server.

The main account

Ahead — the person with Type 1

Signs up in Ahead with their own email. It holds their readings and decides who can follow. Always sign Ahead in as the person living with Type 1, never as a follower.

Companion accounts

Ahead Lite — one per follower

Each family member or caregiver signs up in Ahead Lite on their own phone with their own email. One Lite account can follow several people, like a parent with two kids.

No account

AheadBLE and the watch app

AheadBLE only connects your sensor to your phone. The watch app uses the account you already signed in with on your phone.